CLP, CHP Hydraulic Pumps

– Gear pump delivery: 350 – 500 cm3 /min at 1500 rpm
– Pressure: up to 2 MPa – Preset to 0.5 MPa
– Oil viscosity: from 15 to 1000 cSt at operating temperature
– Electric motor: three phase – frame size 56
– 90W protection degree IP 55 class insulation F
– Power supply voltage: 220/380V 50Hz – 260/460V 60Hz
– Tank complete with lubricant level sight glass and drainage plug, filling plug with filter.
– Suction filter: 250 micron
– Pressure regolation valve accessible from the outside
– Release valve for system equipped with direct response
– Pressure gauge with 2 MPa scale for readout of line pressure
– Oil minimum level switch: max current 3A
– Max voltage 220V a.c. – 150V d.c.
– Max commutable power 50W – 50VA

Description

The electric pump is composed by a commercial motor 814 IP 55, voltage 220/380V 50 Hz insulation class F steel joint, aluminium die-cast spider, sintered steel gear pumps, casehardened and hardened steel shafts and gears, seal on the drive shaft.

Pump delivery: 0.33 cm3/revolution (500 cm3 at 1500 rpm) Pressures max 0.2 MPa FOR CONTINUOUS SERVICE max 0.7 MPa FOR INTERMITTENT SERVICE (50%) (under charge max time at max pressure: 15 min.)

The direction of rotation is not relevant. Generally the electric pump is supplied with counterclockwise direction of rotation, otherwise exchange the suction with the delivery.