Sole UK & European Agents
For Showa Centralised
Lubrication Systems


T: 02476 223 226

Series 1 Pump

Brief Description: Brass housing with integral relief valve, 3/8″ NPT ports
Primary Application: Carbonated Water
Secondary Application: Welding
Additional Applications: Carbonatation, Espresso/Coffee, Welding, Cold Carb Circulation, Reverse Osmosis, Beer Chillers, Pesticide Systems, Solar Applications
Mounting Styles: Clamp-on, Bolt-on



PROCON’s Series 1 pumps have the protection of an integral inlet strainer. The standard strainer is a 100 mesh wire screen. It traps particles that can cause serious damage to the pump. The strainer is equipped with a removable cap to allow periodic cleaning, every 4 months under normal conditions (more frequently with hard or turbid water). The clamp-on mounting style is shown in the photo; bolt-on mounting is also available.


111A100F11AA, 111A125F11AA, 101B100F11BC, 101B100F11BC-875L, 101R100R12BC, 101B070R12BA, 101A100F11BC, 101A100F11AA, 101A100F11BA, 111A060F12CB, 111A125F11XX, 101C100F11BC, 101D100F11BD, 101A015F11BD, 10544, 11B025F11CB, 111A035F12CB, 101A050F11AA


Body Material: Type 303 stainless steel or brass
Capacity: 15 to 140 GPH
Nominal Speed: 1725 RPM
Typical Horsepower Required: .25 to .50 HP
Maximum Discharge Pressure: 250 PSI
Rotation (viewed from nameplate): Clockwise
Dry Weight: Approximately 2.5 lbs.
Dimensions: 3.56″ x 3.49″ x 3.86″
Self Priming (water): 6 ft. Maximum Lift
Port Size: 3/8 NPT Inlet and Outlet