Sole UK & European Agents
For Showa Centralised
Lubrication Systems


T: 02476 223 226

YET-E Lubrication Pump

– Lubrication: The lubricator runs via lubrication time after power-on.
– Intermittence:The lubricator runs via intermittent time after power-on.



Intermittent time is adjustable.
The float switch output signal when the oil level is low(For YET-N, the beeper alarms when the oil level is low).
The over temperature/load protector is attached to protect the motor.
The function of fixed pressure for the pressure relief valve can prolong the system life
The indicator on the panel can display the operation of the lubricator.
The pressure is optional via customer’s demand.
Output Pressure can reach 7 kgf/cm2 to make sure each port with enough output volume.
“Feed” key can force the lubricator to function.


Voltage (Single Phase) 110V or 220V 110V or 220V
Consumption Power (W) 80 80
Capacity of Terminal Output (A) 3 3
Lubrication Time (second)
Intermittent Time (minute) 0-60 0-60
Output Bore Ø4 or Ø6 Ø4 or Ø6
Max. Output Pressure Mpa (kgf/cm2) 0.7(7) 0.7(7)
Output Volume (cc/cycle) 6 (Standard) 15 (Option) 6 (Standard) 15 (Option)
Float Switch O O
Pressure Gauge X O O O
Alarm Beeper X O
Tank Capacity (L) 2 3 4 (Transparent Plastic Tank) 4 (Aluminum Tank)
Weight (kg) 2.6 2.9 3.2 3.6
Note: Because of continuous improvements, above specifications are subject to change without prior notice.


Ishan Lubrication - YET-E Lubrication Pump - Drawing